Youth 570 Open O500 - O599
Two seat vehicles built using a production UTV. Maximum engine size 650cc.
Two seat vehicles built using a production UTV. Maximum engine size 650cc.
DEFINITION
Two seat vehicles built using a production UTV. Any manufacture UTV may be used providing the model used has been series produced in a minimum of 1000 units within a twelve (12) month period. Maximum engine size 650cc. Stock production body parts required. Driver must be ten (10) years old minimum. Maximum age is sixteen (16) years old.
GENERAL REGULATIONS
Entrants in this class shall comply with all applicable general regulations.
TECHNICAL REGULATIONS
This class is an Open class, and all components will be considered open unless unrestricted herein. Manufactures body, engine, transmission, chassis, and drive train components must be retained.
NOTE: The UTR abbreviations listed under this class (I.E. UTR1 HELMETS) refer to UTR cross reference listings in the front of this book. These UTR cross-referenced listings are part of the class rules. Where a conflict occurs between the UTR cross-referenced listing and a rule contained under this class, the rule contained under this class takes priority.
SAFETY EQUIPMENT
UTR1 HELMETS
UTR2 PROTECTIVE CLOTHING
UTR3 EYE PROTECTION and DENTURES
UTR4 HEAD AND NECK RESTRAINTS
UTR5 FIRST AID KIT
UTR6 EMERGENCY SIGNALING DEVICES
UTR7 HORNS
UTR8 REFLECTORS
UTR9 FIRE SUPPRESSION EQUIPMENT
UTR10 SURVIVAL SUPPLIES
SUSPENSION COMPONENTS
UTR11 SHOCK ABSORBERS and BUMP STOPS
Shocks are open.
UTR12 SECONDARY SUSPENSION
UTR13 WHEELS and TIRES
UTR14 FASTENERS
STEERING and BRAKE COMPONENTS
UTR15 STEERING
UTR16 BRAKES
ELECTRICAL SYSTEM
UTR17 IGNITION
UTR18 BATTERIES
UTR19 LIGHTS
UTR20 STARTERS
FUEL SYSTEM
UTR21 FUEL
UTR22 FUEL TANKS
UTR23 FUEL FILLERS LINES, VENTS, and CAPS
ENGINE, TRANSMISSION and DRIVELINES
UTR24 ENGINE and ENGINE DISPLACEMENT
Maximum engine displacement is 650cc.
Engine must remain stock as delivered by the manufacture.
No engine parts may be modified or replaced.
UTR25 ENGINE REPLACEMENT
UTR26 TRANSMISSION
UTR27 THROTTLES
UTR28 EXHAUST
Open.
UTR29 DRIVE SHAFTS
UTR30 FLYWHEEL SHIELDS
UTR31 FLUID COOLERS
UTR32 AUXILIARY EQUIPMENT
UTR33 SUPERCHARGERS and TURBOCHARGERS
VEHICLE SAFETY EQUIPMENT
UTR34 ROLL CAGES
Stock production roll cages are not allowed.
UTR35 SAFETY HARNESS
UTR36 SAFETY NETS
UTR37 SEATING
GENERAL VEHICLE COMPONENTS
UTR38 DRIVERS COMPARTMENT
UTR39 DOORS AND LATCHES
Doors must be securely closed.
Aluminum side panels only. No carbon fiber.
UTR40 FIREWALLS
UTR41 BALLAST
UTR42 WEIGHT
1200 pounds minimum weight, including the driver.
UTR43 FLOORBOARDS
UTR44 BUMPERS and HAZARDOUS PROTRUSIONS
Safe front and rear bumpers required. No shape corners or hazardous protrusions.
UTR45 MIRRORS
UTR46 SKID PLATES
UTR47 STORAGE
UTR48 CHASSIS and BODY
Stock grill, hood, and front and rear fenders must be used.
Roof and doors must be covered with sheet metal .060 thick minimum.
Aluminum side panels only. No carbon fiber.
UTR49 HOSES
UTR50 IDENTIFICATION MARKINGS
Race numbers required on both sides and rear of vehicle. black numbers on a white background only. Minimum six(6) inch tall numbers.
Unlimited Off-Road Racing will assign race numbers.
